- Speedy Auto Glass
- Docks by Trucks Plus
- Trucks Plus
- 613-732-2824
- 1-800-560-0513
Ramps
Shore docking system specialist Roll-N-Go has engineered marine rail systems and ramps for the most common sizes and shapes of boats and PWC. Get your watercraft safely and simply out of the water with a ramp by Roll-N-Go.
Ramps by Roll-N-Go
PWC Shore Ramp
Keep your PWC's safe from the scratches of coming in out of the water with a lightweight and portable ramp. The adjustable rail spacing provides a solution for any PWC, including 3-person models.
- length: 11'
- width: 30"
- rail width: 11"-14"
- max-load: 1000 lbs
- number of rollers: 14
- roller type: donut shaped polyolefin
- roller bearing: straight bore
- construction: aluminum
- winch: zinc plated
- winch gear ratio: 4:1
- winch dead lift rating: 1200 lbs
- winch strap length: 25'
750 Shore Ramp
If you own a smaller fishing boat, sail boat, or row boat, you'll love the affordablity and durability of the 750 Shore Ramp. The system can adjust three winch heights and two rail widths to create the best fit for your boat. If your shoreline requires it, optional 9' extensions, wide support kit, support leg, and float kits are available.
- length: 17' 10"
- width: 21"-24"
- rail width: 21"-24"
- max-load: 750 lbs
- number of rollers: 12
- roller type: donut shaped polyolefin
- roller bearing: DelrinT spanner and bushing
- construction: aluminum
- winch: zinc plated
- winch gear ratio: 4:1
- winch dead lift rating: 1100 lbs
- winch strap length: 20'
1200 Shore Ramp
If you have a midsize boats up to 1200 lbs you can easily protect your boat with this shore ramp. The 50' cable and 5:1 gear ratio winch make it simple to bring your boat in and out of the water. Optional upgrades include extensions, a winch and cable upgrade, and wide support, support leg, and float kits.
- length: 17' 10"
- width: 24"-40"
- rail width: 24"-40"
- max-load: 1200 lbs
- number of rollers: 16
- roller type: donut shaped polyolefin
- roller bearing: DelrinT spanner and bushing
- construction: aluminum
- winch: zinc plated
- winch gear ratio: 5:1
- winch dead lift rating: 1600 lbs
- winch strap length: 50'
2000 Shore Ramp
If you need a heavy-duty shore docking system, this is the model for you. This model is typically used for 16' to 18' boats up to 2000 lbs. The hull of your boat is supported on tilting axles, each with two extra-wide gray urethane rocking rollers. Optional upgrades includes extensions, a winch and cable upgrade, and wide support, support leg, and float kits.
- length: 17' 10"
- width: 33"-49"
- rail width: 24"-40"
- max-load: 2000 lbs
- number of rollers: 24
- roller type: ribbed 4" wide polyurethane
- roller bearing: rocking DelrinT sleeve
- construction: aluminum
- winch: zinc plated
- winch gear ratio: 5:1
- winch dead lift rating: 1600 lbs
- winch strap length: 50'
Pontoon Shore Ramp
Pontoon's need protection too. Now you can easily get your pontoon boat on and off the water. This model is used for pontoon boats with 18" to 26" round pontoon diameters. Optional upgrades includes extensions, a winch and cable upgrade, and wide support, and support leg kits.
- length: 17' 10"
- width: adjustable
- rail width: adjustable
- max-load: 2000 lbs
- number of rollers: 52
- roller type: donut shaped polyurethane
- roller bearing: DelrinT spanner and bushing
- construction: aluminum
- winch: zinc plated
- winch gear ratio: 5:1
- winch dead lift rating: 1600 lbs
- winch strap length: 50'
Manufacturer
- Roll-N-Go
- www.roll-n-go.ca
Contact Docks by Trucks Plus, 613-732-2824, to speak with a representative about the marine rail system and ramp options for you.